Optimization of Properties in Ti-6Al-4V Alloy Castings and Weldments

by : Reham Reda Abbas Awad -  Phd - 2014
Supervisor(s) : Dr. Abdel-Hamed A. Hussien,Dr. El-Sayed M. El-Banna,Dr. Adel A. Nofal, Central Metallurgical R & D Institute
( Ti-6Al-4V Alloy, Castings, Weldments, Phase transformation, Heat treatment, Tensileproperties, Impact toughness, Hardness, Wear resistance )

The Effect of Ultrasonic Vibration on the Microstructure and Mechanical Properties of Aluminium Alloy A356

by : Abdelfatah. Ahmed. Taher Khalil -  Phd - 2014
Supervisor(s) : Dr. Abdel-Hamed A. Hussien,Dr. El-Sayed M. El-Banna,Dr. Mohamed A. Waly, Central Metallurgical R & D Institute
( Aluminium alloy A356, Ultrasonic vibration, Microstructure mechanical properties, Grain refiner (Al-5Ti-1B), Modification (Sb) )

Effect of Heat Input and Filler Metal on Welding Superaustenitic and Super duplex Stainless Steels

by : Mayada Sayed Mahmoud  -  Phd - 2014
Supervisor(s) : Dr. Mohamed R. El-Kousy,Dr. Nahed A. Abdel-Raheem
( Superaustenitic, Duplex, Super duplex, Stainless steels, Unmixed zone, Secondary austenite, Microstructure, Toughness, Hardness )

Surface Treatment of Low Carbon Steel by Friction Stir Processing

by : Mohamed Salah M. Noweshy -  Phd - 2014
Supervisor(s) : Dr. Mohamed R. El-Kousy,Dr. Nahed A. Abdel-Rahem,Dr. Morsy A. Morsy, Central Metallurgical R & D Institute
( Surface treatment, Low carbon steel, WC, TiB2, Friction stir processing, Hardness, Wear resistance )

Modified Black Oil PVT Properties Correlations for Volatile Oil and Gas Condensate Reservoirs

by : Ibrahim Sayed Abd Allah Nassar -  MSc - 2014
Supervisor(s) : Dr. Mohamed H. Sayyouh,Dr. Ahmed H. El-Banbi
( Fluid properties, Simulation, Equation of state )

Effect of Capillary Pressure on the Numerical Simulation of Fractured and Non-Fractured Reservoirs

by : Mohamed Shams Ramadan  -  MSc - 2014
Supervisor(s) : Dr. Mohamed K. Aly,Dr. Ahmed H. El-Banbi
( Capillary pressure, Reservoir simulation, Reservoir performance )

Thermomechanical Treatment of Ductile Iron with Dual Matrix Structure

by : Hossam Ahmed Abdel-Shafy -  MSc - 2014
Supervisor(s) : Dr. Iman S. El-Mahallawi,Dr. Nahed A. Abdel-Rahem,Dr. Heinz Palkowski, Clausthal University, German
( Ductile iron, Austempering, Thermomechanical processing )

Study and Analysis of Rhomboidity in Continuous Casting Billets

by : Mohamed Amin Mohamed Daowd -  MSc - 2014
Supervisor(s) : Dr. Nahed A. Abdel-Rahem,Dr. Iman S. El-Mahallawi
( Continuous cast billets, Rhomboidity, Carbon equivalent, Mn/S ratio, Casting speed, Temperature superheat )

Contribution to the Hoek and Brown Failure Criterion and its Modifications for Anisotropty

by : Mohamed Ahmed Ismail Ahmed -  MSc - 2014
Supervisor(s) : Dr. Hassan F. Imam,Dr. Yasser M. EI-Shayeb
( Anisotropy, Hoek and brown failure criterion, Rock mechanics, Anisotropy parameter, Degree of anisotropy )

Optimum Scenario Of Shallow Water Drilling Case Study

by : Sayed Moustafa Sayed -  MSc - 2014
Supervisor(s) : Dr. Eissa M Shokir,Dr. Fouad K. Mohamed
( Petroleum, Drilling, Artificial island, Shallow water, Optimum )

Constant Bottom Hole Pressure Drilling Techniques, Tools, Applications and Economics

by : Abdallah MagdyFarahat -  MSc - 2014
Supervisor(s) : Dr. Abdel-Satar A. Dahab,Dr. Abdel-Alim H. El-Sayed
( Managed pressure drilling, Constant bottom hole pressure,Back pressure technique,Continuous circulating system, E-CD™ system, ENI's near balance. )

Electrodeposited Nickel & its Binary& its Ternary Alloys as a Cathode for Hydrogen Evolution

by : Aliaa Abdel-Fatah Mohamed -  MSc - 2014
Supervisor(s) : Dr. Saad M. El-Raghy,Dr. Hafez A. Ahmed,Dr. Randa M. Abdel-Karim
( Nanotechnology, Electrodeposition, Ni-Mo-Fe, Catalysts, Corrosion, Seawater electrolysis )

Effect of Post-weld Heat Treatment on Properties of Stainless Steel 410S

by : Hanan Abdelkader Abdelfettah  -  MSc - 2014
Supervisor(s) : Dr. Mohamed R. El-Kousy,Dr. Nahed A. Abdel-Rahem
( 410S, Welding, Stainless steels, PWHT, HAZ, Microstructure, Toughness, Hardness, Tempering )

Study of Directional Mechanical Properties of Binary Zirconium, Nickel and Iron Alloys

by : Amr Ahmed Mohamed Ahmed  -  MSc - 2014
Supervisor(s) : Dr. Abdel-Hamed A. Hussien,Dr. El-Sayed M. El-Banna,Dr. Zeinab H. Ismail, Atomic Energy Authority
( Anisotropy, Directionality, Tensile properties, Fracture, Zirconium alloys )

An Integrated Model Predicts the Performance of Combination Drive Reservoirs

by : Mohamed Halafawy Yehia -  MSc - 2014
Supervisor(s) : Dr. Abdel-Waly A. Abdel-Waly
( Combination drive reservoirs, An integrated model to simulate performance, An Egyptian field, Future performance prediction for combination drive reservoirs, Combination drive reservoirs performance during water or gas injection )

Automatic Reservoir Model Identification using Artificial Neural Network in Pressure Transient Analysis

by : Ahmed Mohamed Al-Maraghi -  MSc - 2014
Supervisor(s) : Dr. Ahmed H. Al-Banbi
( Artificial neural network, Automatic reservoir model identification )

Effect of Pouring Temperature and Ultrasonic Treatment on The Grain Size and Morphology of Al-4.5% Mg and Al-7% Si Cast Alloys

by : Ahmed Hatem Omar Abdel-Aziz -  MSc - 2014
Supervisor(s) : Dr. Waled M. Khalifa,Dr. Shimaa H. El-Hadad, Central Metallurgical R & D Institute
( Pouring Temperature - Ultrasonic Treatment )

The Morphology, Phase Identification and Mechanical behavior of Complex Aluminum Bronze

by : Kariman Saad Abdel-Wahab  -  MSc - 2014
Supervisor(s) : Dr. Abdel-Hamed A. Hussien,Dr. El-Sayed M. El-Banna,Dr. Mohamed A. Waly, Central Metallurgical R & D Institute
( Nickel aluminum bronze, Microstructure, Kappa phases, Modification, Mechanical properties, Wear resistance )

Simulation of Mine Fires and Their Effect on Ventilation System

by : Mohamed Ahmed Hassan  -  MSc - 2014
Supervisor(s) : Dr. Mohamed A. El-Wageeh
( Simulation, Fires, Mining, Ventilation )

Application of Energy Equation to Optimize ROP and Reduce Formation Damage

by : Mohamed Hosin Mohamed  -  MSc - 2014
Supervisor(s) : Dr. Abdel-Sattar A. Dahab,Dr. Abdel-Aziz M. Abdel-Aziz
( Under balanced drilling, Increasing ROP, Reducing formation damage )

Formulating a High Performance Vegetable Oil Based Mud (VOM) For Deep Water Hthp Wells

by : Mohammed Mokhtar Ebeid -  MSc - 2014
Supervisor(s) : Dr. Abdel-Alim H. El-Sayed
( Vegetable oil mud, Deepwater drilling fluid, HTHP drilling fluid Operations manager, The Egyptian Mud Engineering and Chemicals Company, EMEC )

Anodizing and Characterization of Nanoporous Aluminum Oxide Films

by : Ashraf Kamal Eessaa Mansor  -  Phd - 2013
Supervisor(s) : Dr. Saad M. El-Raghy,Dr. Randa M. Abdel-Kareem,Dr. Rabab M. El-Sherif, Faculty of Science, Cairo Uni.,Dr. Abdel-Aziz F. Waheed, Atomic Energy Authority
( Aluminum, Anodizing, Anodic aluminum oxide, Nanoporous, Templates )

Influence of Heat input and Post-Weld Heat Treatment on Microstructure and Mechanical Properties of Power Boiler Steel P91 (9Cr-1Mo-V-Nb) Weld Joints

by : Mahmoud Abd El Rahman Emam -  Phd - 2013
Supervisor(s) : Dr. Mohamed R. El-Kousy,Dr. Iman S. El-Mahalawi
( Modified boiler steel 9Cr-1Mo, Heat input, Heat treatment, Creep resistance, Corrosion r esistance )

Aluminium Matrix Composites for Automotive Applications Physical, Mechanical and Wear Considerations

by : Fatma M. Moheb Fairouz Ahmed  -  Phd - 2013
Supervisor(s) : Dr. Ahmed M. El-Sheikh,Dr. Malak T. Aboul-Khair *
( Al-matrix composites, Cylinder liner, Al-matrix composites in automotive industry )

Wellbore Stability Study Optimization of Mud Weight, Wellbore Trajectory and Casing Setting Point

by : Ahmed Abdel-Rahman Aboul-Nour -  MSc - 2013
Supervisor(s) : Dr. Fouad K. Mohamed,Dr. Abdel-Sattar A. Dahab,Dr. Ahmed H. El-Banbi
( Drilling geomechanics, Deepwater drilling, Wellbore stability, Mud weight optimization, Trajectory optimization, Casing setting point )

Microstructure And Mechanical Properties of Conventionally and Modified Hardened Medium Carbon Low Alloy Steel

by : Saied El-Shahat El-Tohamy  -  MSc - 2013
Supervisor(s) : Dr. Abdel-Hamed A. Hussien,Dr. El-Sayed M. El-Banna,Dr. Mahmoud M. Tash
( Forced air, Low alloy steel, Microstructure, Quenched and tempered, Mechanical properties, Ni-Cr-Mo steel, Toughness )

Study of Jetting Practices of Structural Casing In Deep-Water Environments in Egyptian Offshore Fields.

by : Yasser Kholaif Sabra Ibrahim -  MSc - 2013
Supervisor(s) : Dr. Abdel-Sattar A. Dahab,Dr. Abdel-Alim H. El-Sayed
( Jetting, Structural casing, Deep-water, Offshore )

Up Grading of Oil Shale by Flotation

by : Nesren M. Khairy Abd El-Aziz  -  MSc - 2013
Supervisor(s) : Dr. Salah El-Dien M. El-Mofty,Dr. Ayman A. El-Midany,Dr. Ahmad M. El-Kammar, Faculty of Science, Cairo Uni.
( Oil shale, Kerogen, Flotation, Surface chemistry )

Performance Analysis of Beam Pumping Systems

by : Mohamed Esmat Abdel-Samee  -  MSc - 2013
Supervisor(s) : Dr. Fouad K. Mohamed,Dr. Abdel-Alim H. El-Sayed,Dr. Abdel-Waly A. Abdel-Waly
( Beam, Pumping expert, System analysis )

Development of a Computer Program Predicting the Performance of Water flooded Oil-Reservoirs using CGM and Streamtube Methods

by : Mounier Issa hafez maarouf  -  MSc - 2013
Supervisor(s) : Dr. Abdel-Waly A. Abdel-Waly,Dr. Eissa M. Shokir
( Oil Reservoir, Predicting the performance )

Effect of Shielding Gases on the Properties of Weldments of Superduplex Stainless Steel and Austenitic Stainless Steel

by : Mohamed Hanafy Sayed Hanafy  -  MSc - 2013
Supervisor(s) : Dr. Mohamed R. El-Kousy,Dr. Nahed A. Abdel-Raheem
( Welding, Superduplex, Shielding gases )

Development of A Software for Optimization of Ultimate Pit Limit

by : Ola M. Asem Abd El-Aziz Ahmed -  MSc - 2013
Supervisor(s) : Dr. Mohamed A. El-Wageeh
( Pit limit, Open pit optimization )

Study of the effect of metallurgical factors of reinforcing steel bars produced by hot rolling and tempcore processes on lap and butt welding

by : Tamer Yahia Nashaat Moustafa -  MSc - 2013
Supervisor(s) : Dr. Mohamed R. El-Kousy,Dr. Nahed A. Abdel-Raheem,Dr. Waleed M. Khalifa
( Tempcore, lap joint, Butt joint, Lap length, Carbon equivalent )

New Proposed Techniques for Optimum Pit Limit Heuristic Algorithms and Software Development

by : Mohamed Mohy M. Saad  -  MSc - 2013
Supervisor(s) : Dr. Ahmed A. Hegazy,Dr. Mohamed A. El-Wageeh,Dr. Yasser M. El-Shayeb
( Open pit design, Pit limit optimization, Pit limit algorithms, Ultimate pit limits )

Effect of Heat Inputs on Welding of Duplex Stainless Steel

by : Ahmed M. Abd El Baset Ahmed  -  MSc - 2013
Supervisor(s) : Dr. Mohmed R. El-Kousy,Dr. Nahed A. Abdel-Raheem
( Heat input, Dissimilar welding, Duplex stainless steel, Super duplex stainless steel )

Assessment of Rock Mass Deformation Modulus equations (using Monte Carlo's statistical Simulation)

by : Samar SayedAbd El-Ghafar Ahmed -  MSc - 2013
Supervisor(s) : Dr. Hasan F. Imam,Dr. Yasser M. El-Shayeb
( Rock mass classifications, Rock mass modulus of deformation, Rock mass, Monte Carlo simulation )

Development of an Integrated Asset Model for Identifying Flow Assurance Constraints to Maximize Gas Fields Reserves

by : Islam El-Sayed Mohamed Moustafa -  MSc - 2013
Supervisor(s) : Dr. Fouad K. Mohamed,Dr. Abdel-Alim H. El-Sayed,Dr. Eissa M. Shokir
( Flow assurance, Integrated asset modeling, Production optimization, Maximizing reserve, Modeling subsea network, Compression staging optimization )

Synthesis and Characterization of BaTio3 Ferroelectric Material

by : Kolthoum Ismail Osman -  Phd - 2012
Supervisor(s) : Dr. Fawzy A. El-Refaie,Dr. Randa M. Abdel-Karim,Dr. Moustafa M. El-Sayed, Atomic Energy Authority
( Ferroelectric materials, BaTiO3, Preparation and properties )

A Study on the Effect of Heat Treatment on Electrical Properties of Plasma Sprayed YSZ

by : Salaam Saadalla Mohamed Elshikh -  Phd - 2012
Supervisor(s) : Dr. Randa M. Abdel-Karim,Dr. Abdel-Aziz F. Wahed, Atomic Energy Authority
( YSZ, PS, Heat treatment, Electrical properties )

Oxidation Behavior of Some Cr Ferritic Steels for High Temperature Fuel Cells

by : Hisham Eldakhly Mohamed -  Phd - 2012
Supervisor(s) : Dr. Saad M. El-Raghy,Dr. Hafez A. Ahmed,Dr. Kamal E. Mohamed, Atomic Energy Authority
( SOFC, Interconnect materials, Ferritic steels, Fe – Cr alloys )

Comparison between Fusion, Friction Stir, and Hybrid Mig-Friction Stir Welding of High Strength Aluminum Alloys 2024 And 7075

by : Amer Ahmed Abdel-Hakeem -  Phd - 2012
Supervisor(s) : Dr. Mohamed R. El-Kousy,Dr. Nahed A. Abdel-Raheem,Dr. Mohamed M. Ghanem *
( Metal inert gas (MIG), Friction stir welding (FSW), Tungsten inert gas (TIG) - Hot cracking, Aluminum alloys, Hybrid welding )

Development of an Advisor Auditor Computer Program for Acidizing Job Design

by : Yasser Ali Ahmed Hassan  -  MSc - 2012
Supervisor(s) : Dr. Abdel-Aziz O. Salama,Dr. El-Sayed A. El-Tayeb,Dr. Mahmoud A. Moahmed
( Matrix acidizing, Stimulation, Acid, Advisor, Auditor )

Proper Selection of Upscaling Techniques For Different Reservoir Driving Mechanisms and Investigation of CO2 Flooding

by : Ahmed Mahmoud Shehata Ahmed  -  MSc - 2012
Supervisor(s) : Dr. Mohamed H. Sayyouh,Dr. Ahmed H. El-Banbi
( Upscaling, CO2 Injection, Reservoir heterogeneity )

Modeling of Separator Conditions Changes with Time for Volatile/Black Oils and Gas Condensate

by : Mohamed Ibrahim M. Ahmed  -  MSc - 2012
Supervisor(s) : Dr. Mohamed H. Sayyouh,Dr. El-Sayed A. El-Tayeb,Dr. Ahmed H. El-Banbi
( PVT, Separator conditions, Reservoir simulation )

Development of an Expert System for Reservoir Fluid PVT Properties Correleations

by : Ahmed Moustafa Abdel-Rahman -  MSc - 2012
Supervisor(s) : Dr. Mohamed H. Sayyouh,Dr. Ahmed H. El-Banbi
( PVT, Oil properties, Expert system )

Resistance for Indentation and Impact of Composites and Sandwich Structure Materials

by : Serag El-Din Salem Ouda Salem -  MSc - 2012
Supervisor(s) : Dr. Nahed A. Abdel-Raheem,Dr. Yehia A. Bahei El-Dien, B.U.E
( Composites, Sandwich structure, Experimental, Quasi-static indentation and low velocity impact )

Effect of Thermomechanical Rolling on Multiphase and HSLA Steels at Compact Strip Production (CSP)

by : Mohamed Ahmed Atef Ibrahim  -  MSc - 2012
Supervisor(s) : Dr. Mohamed R. El-Kousy,Dr. Nahed A. Abdel-Raheem
( Multi phase steel, Dual phase steel )

The Effect of Nitrogen Addition and Heat Input on Microstructure and Mechanical Properties of GTAW of Stainless Steel 304

by : Hossam Ahmed Ali Mansour -  MSc - 2012
Supervisor(s) : Dr. Mohamed R. El-Kousy,Dr. Nahed A. Abdel-Raheem,Dr. Alber A. Sadek *
( GTAW, Argon, Nitrogen, δ-ferrite, AF, A, FA )

An Optimization of Gas Condensate Extraction from Abu Sannan Fields using Optimal Process Operating Conditions

by : Mohamed Shaaban Khater  -  MSc - 2012
Supervisor(s) : Dr. Abdel-Waly A. Abdel-Waly
( Natural gas processing, Condensate recovery, Propane refrigeration, Stabilization )

Modification of Hypereutectic A390 Al-Si Alloy by Means of Solidification under Sonoprocessing Conditions

by : Othman Ahmed Othman -  MSc - 2012
Supervisor(s) : Dr. Abdel-Hameed A. Hussien,Dr. Mohamed M. Ibrahim,Dr. El-Sayed M. El-Banna
( Al-Si A390 alloy, Primary silicon, Ultrasonic treatment, Pouring temperature, Mold preheating temperature, Cooling rate )

A New Approach for Tuning The Equation of State of Petroleum Reservoir Fluids

by : Mahmoud Taha Mohamed Taha -  MSc - 2012
Supervisor(s) : Dr. Mohamed H. Sayyouh,Dr. Ahmed H. El-Banbi,Dr. Abdel-Aziz M. Abdel-Aziz
( Equations of state (EOS), Equations of state tuning, Fluid characterization )

A Comparative Study between Electric Resistance Spot Welding and Friction Stir Spot Welding Applied To Aluminum Alloys

by : Mahmoud Hussien Fahmi -  MSc - 2011
Supervisor(s) : Dr. Mohamed R. EI-Kousy ,Dr. Nahed A. Abdel-Reheem ,Dr. Hamed A. Abdel-Alem *
( Friction stir spot welding, Processing parameter, Static strength, Microstructure )

Laboratory Investigation and Mechanism Analysis of Chemical EOR Against Microbial EOR for Egyptian Oil Fields Implementation

by : Abdul-Rahman Ahmed Omer Kadi  -  Phd - 2011
Supervisor(s) : Dr. Mohamed H. Sayyouh ,Dr. Mohamed A. Khairy ,Dr. El-Sayed A. El-Tayeb
( Chemical EOR, MEOR, Surfactant and polymer solution )

Preparation and Characterization of Electrodeposited Nano-Crystalline Ni-Fe Alloys

by : Yasser Reda Abdel Hamid -  Phd - 2011
Supervisor(s) : Dr. Saad M. El-Raghy ,Dr. Randa M. Abdel-Kareem ,Dr. Madiha A. Shouaib, Metallurgical Research Institute
( Nanotechnology, Electroplating, Corrosion, Electroplating bath, Phases )

Repair Welding of Tool Steels

by : Mohammed Ahmed Elsaady Ali  -  MSc - 2011
Supervisor(s) : Dr. Iman S. El-Mahallawi ,Dr. Emad El-Dien F. El-Kashief ,Dr. Morsy A. Morsy *
( Tool steel, Type of steel, Heat treatment, Hardness tests )

A New Methodolgy Modilifies the Commonly used Equations that Predict the Changes in Pressures of Gas Flow in Pipelines

by : Amira Ahmed Mahmoud Morssy -  Phd - 2011
Supervisor(s) : Dr. Mohamed H. Sayyouh ,Dr. Abdel-Aziz O. Salama ,Dr. Abdel-Waly A. Abdel-Waly
( Gas flow equations, Pressure drop, Pipelines )

Effect of Heat Treatment on Mechanical and Ballistic Properties of 500T Armor Steel

by : Soad Farouk Kamel -  MSc - 2011
Supervisor(s) : Dr. Mohamed R. El-Kousy ,Dr. Nahed A. Abdel-Rahem
( Armox steel 500T, Ultra high strength, Ballistic properties )

Energy and Environmental Impact of Steelmaking Processe

by : Mohamed Mohsen Mohamed Lotfy -  MSc - 2011
Supervisor(s) : Dr. Saad M. El-Raghy ,Dr. Hafez A. Ahmed ,Dr. Gamal M. Megahed, Ezz Steel Co.
( Steelmaking, EAF, BOF, Energy, Dust, Offgas, Slag )

A study of Ti-6AI-4V Alloy Modified by Si-Addition

by : Mohamed Ahmed Abdel-Kawy -  MSc - 2011
Supervisor(s) : Dr. Abdel-Hameed A. Hussien ,Dr. Khaled M. Ibrahim *
( Ti-6Al-4V alloy, Casting, hot swaging, Heat treatment, Si-addition, Grain refinement, Microstructure, Mechanical properties )

Electrodeposition and Characterization of Nanocrystalline Ni-Mo Catalysts

by : Joseph Nagy Halim Ibrahim Ernest  -  MSc - 2011
Supervisor(s) : Dr. Saad M. El-Raghy ,Dr. Randa M. Abdel-Kareem ,Dr. Moataz M. Nabil
( Nanotechnology, Electroplating, Ni-Mo, Catalysts, Corrosion, Composites )

Geo-Mechanical Fluid Flow Model for Stress Dependent Commingled Gas Reservoirs

by : Ahmed Salah El-Dien Zakaria -  MSc - 2011
Supervisor(s) : Dr. Abdel-Waly A. Abdel-Waly ,Dr. Ahmed H. El-Banbi
( Tight gas reservoirs, Stress dependent gas reservoirs, Stress dependent properties, Performance prediction, Material balance equation, Analytical fluid flow equation, Geomechanical model, North sea region )

The Effect of Welding Parameters and Filler Metals on Properties of Low Alloy Steel/AISI 304 Dissimilar Welds.

by : Ahmed Mohamed Aboul-Soud -  MSc - 2011
Supervisor(s) : Dr. Mohamed R. El-Kousy ,Dr. Nahed A. Abdel-Rahem ,Dr. Mohamed M. Ghaniem *
( (2.25 CrMo1), AISI 304 St.St., Dissimilar joints, Welding Parameters )

Development of an Integrated Model to Predict the Performance of Gas Condensate Reservoirs

by : Ahmed Mohamed Farid Ibrahim  -  MSc - 2011
Supervisor(s) : Dr. Ahmed H. El-Banbi ,Dr. Abdel-Waly A. Abdel Waly
( Gas condensate reservoir, Performance prediction )

The Effect of GTAW Heat Input on Mechanical Properties and Corrosion Resistance of Austenitic and Super-Austenitic Stainless Steels

by : Michael Naguib Abdelmasih -  MSc - 2010
Supervisor(s) : Dr. Mohamed R. El-Kousy ,Dr. Nahed A. Abdel-Raheem
( Super, Austenitic, Heat Input, Mechanical Properties, Microstructure, Corrosion Resistance )

Grain Refinement of Magnesium Alloy (AZ91) by Solidification in Ultrasonic Field

by : Mohamed Eissa Moussa  -  MSc - 2010
Supervisor(s) : Dr. Ahmed M. El-Sheikh ,Dr. Mohammed A.Waly *
( Magnesium alloy AZ91; solidification; ultrasonic vibration; boron addition; grain refinement, mechanical properties )

Production Allocation in Multilayers Gas Producing Wells using Temperature Measurments

by : Reda Rabiee Abdel Rasoul  -  MSc - 2010
Supervisor(s) : Dr. Mohamed M. Abdel-Dayem ,Dr. El-Sayed A. El-Tayeb ,Dr. Ahmed M. Ibrahim
( Production allocation, Temperature Measurements )

Recovery of Zinc from Dust of Steelmaking in Electric Furnace

by : Lamiaa Zaky Mohamed  -  MSc - 2010
Supervisor(s) : Dr. Saad M. El-Raghy ,Dr. Hafez A. Ahmed
( Zinc, Electric Arc Furnace, Electric Arc Furnace Dust )

The Wear Behavior of Heat Treated Aluminum Bronze Metal Matrix Composites

by : Manal Amin Ramadan Elsaid  -  Phd - 2010
Supervisor(s) : Dr. Abdel-Hamed A. Hussien ,Dr. El-Sayed M. El-Banna ,Dr. Moustafa A. Gouda, B.U.E
( Aluminum bronze, Composite material, Wear, Heat treatment, Tempering )

Methodology for Selection of the Most Suitable Water Coning Control Method for Vertical Oil Wells Using Eclipse Simulator

by : Tarek Hamed Mahmoud  -  MSc - 2009
Supervisor(s) : Dr. El-Tayeb, E. A.,Dr. Dahab, A. A. ,Dr. Mohamed, M. A.
( Water coning, Coning control, Total penetration, DWS, Dual flow )

Synthesis and Characterization of Alumina or Graphite Particulates Reinforced A319 Matrix Composites

by : Essam Ahmed Mohammed  -  MSc - 2009
Supervisor(s) : Dr. El-Sheikh, A. M.,Dr. Younan, A. A. *
( A319 alloy, Squeeze casting, Vortex, Thermal analysis, Microstructure investigation, Interfacial reactions, Density and porosity measurements )

Investigation of Postweld Heat Treatment of Austenitic Stainless Steel Weldments

by : Yasser El-Sayed Tawfik  -  Phd - 2009
Supervisor(s) : Dr. Ibrahim, M. M.,Dr. Mohamed, H. G. *
( Arc welding, Austenitic stainless steel, PWHT, Mechanical properties, Fracture behavior, Impact toughness )

Characterization of Al - Si Cast Alloys Reinforced By (Al2O3) Nano- Particles

by : Warda Abou-Al-Hassan Mohammed  -  MSc - 2009
Supervisor(s) : Dr. El-Mahallawi, I. S.,Dr. Hussein, A. A.,Dr. Mahmoud, T. S. *
( A356 Aluminum alloy, Metal matrix composite (MMCs), Nano-particles )

Fabrication Technology and Material Characterization of Zinc 27 Aluminum Alloy Reinforced with Different Particulates

by : Ahmed Lotfy Mohammed  -  MSc - 2009
Supervisor(s) : Dr. El-Sheikh, A. M.,Dr. Aboul-Khair, M. T. *
( Stir casting, ZA27 alloy, Squeeze casting, Thermal analysis )

Analysis of Rock Properties and Geological Structures Effect on Underground Excaavation (Tunnels)

by : Tamer Gad Mohamed Ibrahem -  MSc - 2009
Supervisor(s) : Dr. Imam, H. F. ,Dr. Mohamed, Y. S.
( Rock properties, Geological structure, Underground excavation, Tunnel )

Some Metallurgical Studies on The Titanoferrous Ores of Egyptian Black Sand

by : Ahmed Dawood Aly Dawood -  MSc - 2009
Supervisor(s) : Dr. El-Kashif, F. O. ,Dr. Nabil, M. M. ,Dr. Moustafa, M. I. *
( Ilmenite, Titania slag, Iron, Smelting, Electric arc furnace )

New Inflow Performance Relationship For Solution Gas-Drive Oil Reservoirs

by : Mohamed Ali Abd Allah Elias -  MSc - 2009
Supervisor(s) : Dr. El-Tayeb, E. A.,Dr. El-Banbi, A. H. ,Dr. Abdel-Fattah, K. A.
( Flow performance relationship )

Development of A Simulator for Multi-Stage Multi-Zone Carbonate Matrix Acidizing

by : Ibrahim Mohamed Ahmed  -  MSc - 2009
Supervisor(s) : Dr. Dahab, A. A. ,Dr. Mohamed, M. A. ,Dr. Abou-Sayed, I. S. *
( Carbonate rock acidizing, Saudi Arabia )

Rate of Penetration Predictive Model Using Artificial Neural Networks

by : Moustafa Mohamed Amer -  MSc - 2009
Supervisor(s) : Dr. Dahab, A. A. ,Dr. El-Sayed, A. H.
( ROP, Artificial neural networks, Correlation coefficient )

Casing While Drilling and its Implementation in the Western Desert Fields of Egypt

by : Seydou Sinde  -  MSc - 2009
Supervisor(s) : Dr. Dahab, A. A. ,Dr. Abdel-Fattah, K. A.
( Casing while drilling, Western desert, Egypt filelds )

Modified Sensitivity Calculation Approach using the Adjoint Method for Computer-Assisted History Matching

by : Ramez Masoud Azmy Nasralla  -  MSc - 2009
Supervisor(s) : Dr. Ibrahim, A. M.,Dr. Sayyouh, M. H. ,Dr. Abdel-Fattah, K. A.
( History matching, Adjoint methoad, Ensitivity, Permeafilty, Water cut, Gas oil ratio )

Development of Copper Alloys for Heat Exchangers

by : Lobna Abdulaziz Fouad Salh  -  MSc - 2009
Supervisor(s) : Dr. Ahmed, H. A.,Dr. Al-Raghy, S. M. ,Dr. Abdel-Mageed, E. A. *
( Copper Alloys, Heat exchangers )

Friction Stir Welding of 6061 Aluminum Alloy

by : Mostafa Ahmed Mohamed Said  -  MSc - 2009
Supervisor(s) : Dr. El-Kousy, M. R.,Dr. Abdel-Raheem, N. A.,Dr. Ghoneim, M. M. *
( Friction stir welding, Traverse speed, Zigzag line, PWHT, Tensile properties )

Optimizing Abrasion Wear Resistance and Impact Toughness of Chromium-Molybdenum White Irons

by : Reham Reda Abbas Awad -  MSc - 2009
Supervisor(s) : Dr. Hussein, A. A.,Dr. El-Banna, E. M.,Dr. Nofal, A. A. *
( Cr-Mo white iron, Abrasion resistance, Impact toughness, Dynamic solidification, Nb, Heat treatment )

Simulation of HAZ in duplex and super duplex stainless steels by heating in the range 475-950?C

by : Maiada Sayed Mahmoud Mahmoud  -  MSc - 2009
Supervisor(s) : Dr. El-Kousy, M. R.,Dr. Abdel-Raheem, N. A.,Dr. Abdel-Kareem, R. M.
( Duplex, Super duplex, Stainless steels, Sigma phase, Microstructure, Toughness )

Implementation of Underbalanced Drilling Technique in Egyptian Fields

by : Salah El-Din Mahmoud Ahmed  -  MSc - 2009
Supervisor(s) : Dr. Dahab, A. A. ,Dr. Abdel-Fattah, K. A.
( Underbalanced, Mud window )

Developing New Inflow Performance Relationship Correlation for Solution Gas Drive Reservoirs Using Non-Parametric Regression Technique

by : Mahmoud Abdelsalam Khalifa  -  MSc - 2008
Supervisor(s) : Dr. Daoud, A. M.,Dr. Sayyouh, M. H. ,Dr. El-Sayed, A. H.
( Reservoir Simulation, IPR, Non-Parametric Regression (Grace) )

Characterization of Fine Grained Aluminum Alloy Sheets Produced By Accumulative Roll- Bonding (ARB) Process

by : Ibrahim Elsayed M. Elseaidy  -  Phd - 2008
Supervisor(s) : Dr. Ibrahim, M. M.,Dr. Ghoneim, M. M. *
( Accumulative Roll Bonding (ARB) Process, Grain Refining, Fracture Behavior, Age Hardening, Strengthening Processes, Fracture Behavior, Al-Mg-Si (6xxx) Alloys )

Nuclear Materials Mining Activities Impacts On Aerial Environment Case Study: Southwestern Sinai

by : Ayman Abdel Fattah Mahmoud  -  MSc - 2008
Supervisor(s) : Dr. El-Wageeh, M. A. ,Dr. El-Aassy, I. E. *
( Mining, Nuclear Materials, Environment, Underground Atmosphere )

Effect of Thermomechanical Treatment on Microstructure and Mechanical Properties of 42CrMoS4 Steel

by : Omar Mohamed Taha Mohamed -  MSc - 2008
Supervisor(s) : Dr. El-Mahallawi, I. S.,Dr. Nabil, M. A. ,Dr. El-Bitar, T. A. *
( Amount of Deformation, Finish Rolling Temperature, Thermomechanical Treatment, Quenching, Tempering )

Influence of Tundish Transient Parameters on Steel Cleanness in Thin Slab Casting Machine

by : Mohamed Mahmoud Abd Allah  -  MSc - 2008
Supervisor(s) : Dr. El-Mahallawi, I. S.,Dr. Megahed, G. M. * ,Dr. Abdel-Azim, H. A.
( Steel Cleanliness, Transient Stag, Reoxidation )

Risk Assessment in Drilling Operations of Oil And Gas Wells To Reduce Non-Productive Time "NPT" - Delta Fields Case Study

by : Hanan Mahmoud Abdel-Lattef -  MSc - 2008
Supervisor(s) : Dr. Mohamed, F. K.
( Risk Assessment, Drilling Operations, Oil and Gas Wells, Non-Productive Time "NPT" )

Studies on Application of Displacement Chromatography Technique in Purification and Concentration of REEs from REEs Concentrate

by : Ibrahim Mohamed Wafaey -  MSc - 2008
Supervisor(s) : Dr. Moustafa, H. A.,Dr. El-Kashif, F. O. ,Dr. El-Afandy, A. H. *
( Displacement Chromatography, Purification, Rare Earth )

Improvement of Maraging Steels Using Electro-Slag Remelting Technology

by : Hossam Ahmed Mohamed Halfa -  Phd - 2007
Supervisor(s) : Dr. El-Sheikh, A. M.,Dr. El-Demerdash, M. F (The Late),Dr. El-Fawakhry, K. A. - Central Metallurgical Research and Development Institute (CMRDI)
( Maraging Steels, Electro-Slag, Mechanical, Properations, Slag )

A Computerized Technique Optimizes and Predicts the Gas Field Performance According to Market Requirements

by : Ahmed Mohamed Mohamed  -  Phd - 2007
Supervisor(s) : Dr. Abdel-Waly, A. A.
( Gas field Development and Optimization )

Influence of Semi-Solid Casting Process Parameters on Microstructural Characteristics of Mechanically Stirred A356 Aluminum Alloy

by : Laila Shehata Yousef EL-Sayed -  Phd - 2007
Supervisor(s) : Dr. El-Mahallawi, I. S.,Dr. Rashad, R. M.,Dr. Mahmoud, T. S. -Banha University
( Rheocasting, Microstructure, Aluminum Alloy A356, Agglomeration, Entrapped, Eutectic Silicon, Porosity and SSM )

Evaluation of Sensitization and Stress Corrosion Cracking Behavior of 304H Stainless Steel

by : Ahmed Saad Mohammed  -  Phd - 2007
Supervisor(s) : Dr. El-Mahallawi, I. S.,Dr. Rashad, R. M.,Dr. Abdel-Kareem, R. M.
( Sensitization, Carbide Precipitation, Stress Corrosion Cracking, 304H, Stainless Steel, Boiler Tube, Superheater Tube, (EPR) Test, Polarization, Electrochemical Reactivation, Electrochemical Test. )

Study of the Effect of Flux on the Quality of TIG Welds

by : Mahmoud Mohamed Abd Allah  -  Phd - 2007
Supervisor(s) : Dr. Abdel-Raheem, N. A.,Dr. Khalifa, W. M.,Dr. Sadek, A. A. -Central Metallurgical Research and Development Institute (CMRDI)
( A-TIG Welding, Depth to Width Ratio, Penetration Ratio )

A Comparative Study on the Common Water Drive Calculation Methods in Oil and Gas Reservoirs

by : Ilham Abdallah Mahmoud  -  MSc - 2007
Supervisor(s) : Dr. Abdel-Waly, A. A.
( Water Influx Methods, Comparative Study, Water Drive )

A Study of Multiple Heat Treatment and Wear of Cast M2 High Speed Steel

by : Afaf Hassan Ibrahim  -  MSc - 2007
Supervisor(s) : Dr. Hussein, A. A.,Dr. El-Banna, E. M.,Dr. Ezz, S. S.
( Cast High Speed Steel, Heat Treatment, Wear )

Corrosive Wear Performance of Plasma Nitrided Martensitic Stainless Steel 431

by : Ashraf Kamal Eessaa Mansor  -  MSc - 2007
Supervisor(s) : Dr. El-Raghy, S. M.,Dr. Abdel- Kareem, R. M.,Dr. Ahmed, H. A.
( Martensitic Stainless Steel, Nitrogen Steel, Corrosion )

Corrosive Wear of Bronze Friction Resisting Composites

by : Khaled Ahmed Ibrahim Behiry  -  MSc - 2007
Supervisor(s) : Dr. El-Raghy, S. M.,Dr. Abdel- Kareem, R. M.,Dr. Moustafa, S. F. -Central Metallurgical Research and Development Institute (CMRDI)
( Powder Metallurgy, Friction Materials, Bronze Composites, Corrosive Wear, Acidic Rain and Tap Water )

Uncertainty Assessment and Development of Water Saturation Error Analysis Charts for Shaly Sand Formations

by : Samiha Said El Sayed Morsy  -  MSc - 2007
Supervisor(s) : Dr. Hamada, G. M.,Dr. El-Tayeb, E. A.,Dr. Daoud, A. M.
( Uncertainty Assessment, Error Analysis, Shaly Sand Interpretations, Water Saturation Correction Charts )

Study of the Effect of Flux on the Quality of TIG Welds

by : Mahmoud Mohamed Abd Allah  -  MSc - 2007
Supervisor(s) : Dr. Abdel-Raheem, N. A.,Dr. Khalifa, W. M.,Dr. Sadek, A. A. *
( A-TIG Welding, Depth to Width Ratio, Penetration Ratio )

Role of Chemical Composition, and Rolling and Cooling Parameters in Manufacture of High Strength Steel Rebars

by : Ahmed Ramadan Bassuony -  MSc - 2006
Supervisor(s) : Dr. Hussien, A. A. ,Dr. El-Mahallawi, I. S , Dr. Nabil, M. M.
( Tempcore, Accelerated Cooling Process and High Strength Steel, Tempcore Modeling )

Preparation And Evaluation of Coated Bi Polar Plates for Pem Fuel Cells

by : Mohamed Adel Gomaa Mohamed -  MSc - 2006
Supervisor(s) : Dr. Nasr-Allah, M. M. ,Dr. El-Khatib, K. M. **
( Fuel Cell, PEM, Bipolar Plate )

Study on Laser Surface Treatment of Different Tool Steels

by : Mohamed Salah Mohamed  -  MSc - 2006
Supervisor(s) : Dr. El-Kousy, M. R.,Dr. El-Mahallawi, I. S ,Dr. El-Batahgy, A. M. *
( Laser, Tool Steels, Surface Treatment, Wear Resistance )

Three Dimensional Reservoir Stochastic Modeling and Upscaling - Application to a Real Oil Field

by : Basem Nazih Mohamed Tawfik  -  MSc - 2006
Supervisor(s) : Dr. Sayyouh, M. H. ,Dr. El-Banbi, A. H.
( Reservoir, Geostatistics )

Effect of Various Binder Metals on Tungsten Carbide Properties

by : Osama Gaballah Bahig Gaballah -  MSc - 2006
Supervisor(s) : Dr. Ezz, S. S. ,Dr. Hussien, A. A. ,Dr. Moustafa, S. F. *
( Cemented Carbides, Tungsten Carbides, Liquid Phase Sintering, Electroless Coating, Binding Materials )

A New Gas Reservoir Simulation Approach

by : Mohamad Ahmad Amin Mohamad  -  Phd - 2006
Supervisor(s) : Dr. Salama, A. O. ,Dr. Sayyouh, M. H. ,Dr. Tantawy, M. A. *
( Gas Reservoir )

Effect of Nitrogen Content on Corrsive Wear of 316 L Austenitic Stainless Steel

by : Sobhy Abdel-Hameed Ahmed  -  MSc - 2006
Supervisor(s) : Dr. Abdel-Kareem, R. M.,Dr. Ahmed, H. A.,Dr. Mohamed, K. E. *
( Austenitic Stainless Steel, Solution Heat Treatment Aging, Nitrogen Content )

Monitoring of Hydrocarbon Potential in Sandstone Reservoirs using Thermal Decay Time (TDT) and Cased Hole Formation Resistivity (CHFR) Techniques

by : Ahmad El-Sayed Mohamed Hegazy  -  MSc - 2006
Supervisor(s) : Dr. Sayyouh, M. H. ,Dr. El-Sayed, A. H. , Dr. Hamada, G. M.
( Reservoir, TDT, CHFR )

Effect of Gamma Irradiation on Stimulating the Indigenous Microorganisms in Petroleum Reservoirs

by : Amr Ahmed Kadry Aboul-Ghiet -  MSc - 2006
Supervisor(s) : Dr. Abdel-Dayem, M. M. ,Dr. Sayyouh, M. H. , Dr. Ali, M. K.
( Microbial Enhanced Oil Recovery, Microorganism, Bacteria )

Drilling Fluids Optimization in Gulf of Suez Area

by : Mohamed Atwa Mohamed Atwa  -  MSc - 2006
Supervisor(s) : Dr. Dahab, A. A. ,Dr. El-Sayed, A. H.
( Drilling Fluids Optimization )

A Study on Role of Nitrogen in 316L Stainless Steel Weldments"

by : Mohamed Ashour Saad Wahba  -  MSc - 2006
Supervisor(s) : Dr. El-Banna, E. M.,Dr. Hussien, A. A. ,Dr. Sadek, A. A. *
( Welding, Stainless Steel, Nitrogen, Arc Efficiency, Hot Cracking )

Microstructure and Corrosion Properties of P/M Fabricated Martensitic Stainless Steel Containing Nitrogen

by : Ibrahim Osman Mohammad  -  MSc - 2006
Supervisor(s) : Dr. Ibrahim, M. M.,Dr. Abdel-Kareem, R. M.,Dr. Wahed, A. F. *
( Microstructure, Corrosion Properties, (P/M) Martensitic Stainless Steel, Nitrogen )

Nuclear Magnetic Resonance (NMR) and Conventional Logs Evaluation of Tight Gas Sand Reservoir

by : Mahmoud Mohamed Anwar  -  MSc - 2006
Supervisor(s) : Dr. Abdel-Waly, A. A.,Dr. Hamada, G. M.,Dr. Orabi, M. E. *
( NMR, NMR Permeability, DMR Porosity, BGMRK Capillary From NMR )

Effect of Water Injection on Sand Production Associated With Oil Production in Sandstone Reservoirs

by : Ibrahim Essam Eisa Hussein -  MSc - 2006
Supervisor(s) : Dr. Abdel-Waly, A. A.,Dr. Hamada, G. M.
( Sandstone Reservoirs, Water Injection )

Prediction of Scale Deposition In Gulf of Suez Oil Fields

by : Mostafa Mohamed Ismail Refaey -  MSc - 2006
Supervisor(s) : Dr. Abdel-Waly, A. A.,Dr. Hamada, G. M.
( Brine, Carbonates, Sulfates, Scale Tendency )

Effect of Calcium Addition on The Cleanliness of Low Carbon Al killed Steel

by : El-Shoukery Abdel-Fadeel Abdel-Aziz  -  MSc - 2006
Supervisor(s) : Dr. Ahmed, H. A.,Dr. El-Mahallawi, I. S ,Dr. Megahed, G. M. *
( Alumina Inclusion, SEN Clogging, Ca Treatment, CaS Formation )

Effect of Heat Treatment and Alloying Elements on Ductile Iron Weldments

by : Mohamed Abdel-Atty Abdel-Wahed -  MSc - 2006
Supervisor(s) : Dr. El-Kousy, M. R.,Dr. El-Banna, E. M.,Dr. Moustafa, I. M. *
( Ductile Iron, Alloying Elements, Welding, Austempering )

Effect of Retrogression and Re-aging on Mechanical Properties and Stress Corrosion Cracking of Aerospace Al -Zn Alloy(7075)

by : Yasser Reda Abdel Hamid  -  MSc - 2006
Supervisor(s) : Dr. Abdel-Kareem, R. M.,Dr. El-Mahallawi, I. S
( Stress Corrosion Cracking SCC, Retrogression and Reaging RR )

Studies on Zirconium Metal Extraction from Rosetta Zircon Concentrate

by : Amr Mohammed Abdelkader  -  MSc - 2006
Supervisor(s) : Dr. Abdel-Kareem, R. M.,Dr El-Kashif, F. O. ,Dr. El-Hazek, N. T. *
( Zirconium, Calciothermic, Electrochemical Reduction, Alkalis Fusion, Zircon, Basic Sulfate Treatment, Oxychloride Treatment )

Effect of Heat Treatment Conditions on Mechanical Properties of High-C High-Cr Steels

by : Mohsen Mahmoud Omran -  MSc - 2006
Supervisor(s) : Dr. El-Kousy, M. R.,Dr. El-Mahallawi, I. S , Dr. El-Shazly, M. H.
( High-C High-Cr Tool Steel, Heat Treatment, Double Quenching, )

A Computer Program to Develop the Performance Curves for the Sucker Rod and the Electrical Submersible Pumps, and to Predict their Operating Conditions in an Oil Well Production System

by : Mohammed Ali Ibrahim Sayed -  MSc - 2006
Supervisor(s) : Dr. Abdel-Waly, A. A.,Dr. El-Tayeb, E. A. M. , Dr. El-Banbi, A. H.
( Artificial Lift, Pump Intake Pressure, Pump Intake Curves, Optimum Operating Conditions, Multi-Phase Flow )

A study of the Effect of Thermal Cycling on Microstructure and Properties of Grade 300 Maraging Steel

by : Ahmed Mohammed Nabawy  -  MSc - 2005
Supervisor(s) : Dr. El-Banna, E. M.,Dr. Hussien, A. A. ,Dr. Gouda, M. A. **
( Thermal cycling, Microstructure, Mechanical properties, Volume fraction. )

Corrosion Behavior of Thermo- Mechanically Treated Steel Rebars

by : Osama Mohamed Abd Ellatif Ali -  MSc - 2005
Supervisor(s) : Dr. El-Mahallawi, I. S.,Dr. El-Raghy, S. M.,Dr. Megahed, G. M. *
( Corrosion, High strength steel, Thermomechanical treatment, Rebars, Potentiodynamic polarization )

A Study on Grain Refinment and Modification of Hypoeutectic Al-3 and 5.3 % Si Alloys

by : Mahmoud Mohamed Talaat  -  MSc - 2005
Supervisor(s) : Dr. El-Banna, E. M.,Dr. Ezz, S. S. ,Dr. Hussien, A. A.
( Grain refinement, Eutectic modification, Si poisoning )

Effect of Tempcore Cooling Conditions on the Mechanical Properties of Tempcore Steel Rebars

by : Medhat Mohamed Hashem  -  MSc - 2005
Supervisor(s) : Dr. El-Mahallawi, I. S.,Dr. Megahed, G. M. * ,Dr El-Kousy, M. R.
( Tempcore steel rebars, Equalizing temperature, Mathematical model )

Degradation of Zirconia Ceramics in Water Environment

by : Ezzat Salah El-Din El-Shazly -  MSc - 2005
Supervisor(s) : Dr. El-Raghy, S. M.,Dr. Ahmed, H. A.,Dr. El-Hout, S. M. **
( Degradation, 3Y-TZP, Al2O3, Phase transformation )

Electrochemical Behavior of Powder Metallurgy Fabricated Ti3SiC2

by : Aly Hassan Abdel-Said Nassar -  MSc - 2005
Supervisor(s) : Dr. El-Raghy, S. M.,Dr. Abdel-Kareem, R. M.,Dr. Ahmed, H. A.
( Corrosion, Ti3SiC2, Hot isostatic pressing, Hot pressing. )

Ni-Yttria Stabilized Zirconia anode for Solid Oxide Fuel Cells

by : Kolthoum Ismail Osman -  MSc - 2005
Supervisor(s) : Dr. El-Raghy, S. M.,Dr. Abdel-Kareem, R. M.,Dr. El-Sayed, M. M. *
( Fuel cells, Solid oxide fuel cells, Ni/YSZ anode )

Effect of Rolling Reducation on Mechanical Behavior of Aluminum Alloy 6061

by : Eltohamy Rabea Elsharkawy -  MSc - 2005
Supervisor(s) : Dr. El-Mahallawi, I. S.,Dr. El-Kousy, M. R.,Dr. Abdel-Azim, M. E. *
( Solid state welding, Roll bonding, 6061 Aluminum alloy, Nuclear fuel, Research reactors, Metal caldding processes )

Wear Behavior of Nb-V High Strength Low Alloy Steel

by : Yasser Fouad Ahmed Hussein -  Phd - 2005
Supervisor(s) : Dr. Hussien, A. A. ,Dr. Gouda, M. A. *
( HSLA, Wear, Low carbon steel, High strength )

A Methodology for Increasing Oil Recovery by Using a Remediated Separated Bacteria at Harsh Petroleum Reservoir Conditions

by : Mohamed Ahmed Samir  -  Phd - 2005
Supervisor(s) : Dr. Abdel-Waly, A. A.,Dr. El-Tayeb, E. A.,Dr. Sayyouh, M. H.
( Bacteria, Enhanced, Oil, Recovery, Re-mediation, Bio-surfactant, HRSH, Salinity, Temperature )

Volatile Oil and Gas Condensate Fluid Behavior for Material Balance Calculations and Reservoir Simulation

by : Khaled Abdel Fattah Ahmed -  Phd - 2005
Supervisor(s) : Dr. Sayyouh, M. H. ,Dr. El-Banbi, A. H.
( PVT Properties, Equation-of-state, Modified black-oil simulation, General material balance, Compositional simulation, New correlation of RV. )

The Effect of Tin, Copper and Chromium Residuals on the Structure and Properties of Grey Cast Iron

by : Mohamed Mahmoud Mohamed  -  Phd - 2005
Supervisor(s) : Dr. El-Kousy, M. R.,Dr. Nofal, A. A. *
( Grey cast iron, Residual elements, Ferrous scrap, Tin in grey iron )

An Approach for Drilling Wastes Control (Case Study)

by : Ahmed Mostafa Amir Ahmed  -  MSc - 2005
Supervisor(s) : Dr. Dahab, A. A. ,Dr. Mohamed, F. K. ,Dr. Shoker, E.
( Drilling licastes, Control )

Metallurgical Changes During Welding of Duplex Stainless Steel

by : Yasser Abdel Sattar Sallam -  MSc - 2005
Supervisor(s) : Dr. Ibrahim, M. M.,Dr. El-Banna, E. M.,Dr. Shaaban, H. I.*
( Welding, Duplex, Stainless steel )

Effect of Vanadium and Heat Treatment on Mechanical Properties of 3%Nicrmo-Steel (Gun Steel)

by : Mohammed Morsi Mohammed  -  MSc - 2005
Supervisor(s) : Dr. El-Mahallawi, I. S.,Dr. El-Banna, E M.
( Gun steel, Grain refining, Carbide precipitation )

Developing a Numerical Simulator to Predict Water Coning Performance Under Several Operating Conditions

by : Mohamed Gamal El Din Bastawisi -  Phd - 2003
Supervisor(s) : Dr. Salama, A. O. ,Dr. Abdel-Dayem, M. M. ,Dr. Dahab, A. A.
( Water coning, Simulation model, Viscosity variations, Wettability effect )

Improvement of High Speed Tool Steel by Using Electro-Slag Remelting Technology

by : Hossam Ahmed Mohamed Halfa -  MSc - 2003
Supervisor(s) : Dr. El-Demerdash, M. F. ,Dr. El-Fawakhry, K. A.M.**
( Tool steel, Electro-slag remelting )

A study on Resistance Spot Welding of Galvanized Steel and Stainless Steel

by : Essam Rabea Ibrahim Mahmoud -  MSc - 2003
Supervisor(s) : Dr. El-Kousy, M. R.
( Resistance spot welding, Galvanized steel, Stainless steel )

Friction Welding for Aluminium and Some of its Alloys with Stainless Steel (304) Used in Aeronautics Systems

by : Hassan Nassef Hassan Kamel -  MSc - 2003
Supervisor(s) : Dr. Ibrahim, M. M.
( Friction welding, Aluminium, Stainless steel )

Effect of Heat Treatment on the Mechanical Properties and Weldability of Martensitic Stainless Steel ( 16 Cr - 5 Ni - 1 Mo )

by : Mahmoud Abd El Rahman Abd El Salam -  MSc - 2003
Supervisor(s) : Dr. El-Kousy, M. R.
( Martensitic stainless steel )

Effect of Thermomechanical Treatments on Mechanical Properties and Microstructure of 55Cr3 Spring Steels

by : Atef Mohammed Tawfeek Shehata -  MSc - 2003
Supervisor(s) : Dr. Nasr-Allah, M. M. ,Dr. El-Mahallawi, I. S. ,Dr. El-Betar, T. A.*
( Spring steel 55Cr3, Continuous casting, Thermomechanical treatment, Mechanical tests )

Prediction of Surface Blast Patterns Using Artificial Neural Networks

by : Aymnan Samir Gad El-Sayed  -  MSc - 2003
Supervisor(s) : Dr. El-Adawi, S. A. ,Dr. El-Shayeb, Y. M.
( Blasting, Surface blast, Neural networks, Surface mining )

Mine Investment Decision Making(Case Study of Zalim Gold Prospect)

by : Ahmed Mohsin M. Al-Attas -  MSc - 2003
Supervisor(s) : Dr. El-Wageeh, M. A. ,Dr. Al-Juhani, M. S.*
( Feasibility, MIND, ZALIM, Decision making )

Evaluation and Development of Low Permeability Gas Reservoirs: Application to Abu-Roash "F" Formation in Western Desert, Egypt

by : Sayed Fadel Ahmed -  MSc - 2003
Supervisor(s) : Dr. Osman, A. ,Dr. Sayyouh, M. H. ,Dr. Tantawy, M. A. *
( Gas reservoir, Abu-Roash, Western desert )

Oxidation of Some P/M Processed NiAl -Base Alloys

by : Hisham El-Dakhly Mohamed  -  MSc - 2003
Supervisor(s) : Dr. El-Raghy, S.M. ,Dr. Ahmed, H. A. ,Dr. Mohamed, K. E.*
( Oxidation, Intermetallic compound, ?-NiAl )

Creep and Mechanical Properties of Duplex and Austenitic Stainless Steels

by : Basem Tawfeek Mahmoud -  MSc - 2003
Supervisor(s) : Dr. Ibrahim, M. M. ,Dr. El-Sisi, I. A.
( Creep, Mechanical properties, Duplex stainless steels, Austenitic stainless steel )

A Study on Hardfacing Techniques of Carbon Steels

by : Saad Abdel Mouhsen Mohamed -  MSc - 2003
Supervisor(s) : Dr. El-Kousy, M. R.,Dr. Abdel-Reheim, N. A,Dr. El-Batahgy, A. M
( Abrasion wear, Iron-base, Nickel-base )

Role of Thermomechanical Treatment on the Aging and Mechanical Behavior of 6082 Al-Mg-Si Alloy

by : Mahmoud Mohamed Ibrahim Tash -  MSc - 2002
Supervisor(s) : Dr. Hussein, A. A.,Dr. Ezz, S. E. S.
( TMT, Precipitation, Aging, Cold work, Al alloys )

Austempering of Spheroidal Graphite (SG) Cast Iron

by : Amer Ahmed Abdel-Hakim -  MSc - 2002
Supervisor(s) : Dr. Ibrahim, M. M.,Dr. El-Sisi, I. A.,Dr. Yehia, E. M.*
( Austempered Ductile Iron (ADI), Spheroidal, Graphite (SG )

In-Service Inspection Program for Welded Parts in Nuclear Research Reactors

by : Yasser El-Sayed Tawfik El-Lethy  -  MSc - 2002
Supervisor(s) : Dr. Ibrahim, M. M. ,Dr. El-Sisi, I. A. ,Dr. Shabaan, H. I.*
( In-service, Inspection, Welding, Nuclear reactors )

Effect of Heat Treatment on the Microstructure, Mechanical and Corrosion Properties of 16Cr-5Ni-1Mo Precipitation Hardening Stainless Steel

by : Mohallab Marie El-Dawood  -  Phd - 2002
Supervisor(s) : Dr. El-Kousy, M. R. ,Dr. El-Mahallawi, I. S. ,Dr. Abdel-Azeem, M. E.*
( Martensitic PH stainless steel, Heat treatment, Mechanical properties, Corrosion, Creep, Reversed austenite )

Optimal Directional Drilling using Genetic Algorithm

by : Mohammed Kamal Mohammed Ali -  MSc - 2002
Supervisor(s) : Dr. Eid, S. M. A. ,Dr. Abdel-Waly, A. A. ,Dr. Shokir, E. M.
( Directional drilling, Genetic algorithms, Optimization )

Prediction of the Performance of Multi-Layered Oil Reservoirs

by : Ehab Saad Mahmoud Ali -  MSc - 2002
Supervisor(s) : Dr. Michael, Y. A. ,Dr. Abdel-Fattah, K. A.
( Crossflow, Layered reservoirs )

Developed Approach to Analyze, Predict and Prevent Drill String Failure - Case Study

by : Ibrahim Abul-hamd Abdel Aziz  -  MSc - 2002
Supervisor(s) : Dr. Dahab, A. A. ,Dr. Shokir, E. M. ,Dr. El-Tayeb, E. A.
( Drill string failure, Statistical analysis, Programming )

The Optimum Heat Treatment Design for Al -Alloy 7075 Used in Mechanical Systems

by : Mossa Mostafa Mossa El-Robaa -  MSc - 2002
Supervisor(s) : Dr. Ibrahim, M. M. ,Dr. El-Sisi, I. A.
( 7075 Al-alloy, Heat treatment, Precipitation hardening, Mechanical properties, Microstructure, Fractography )

Effect of Welding Variables on the Properties and Structure of Austenitic-to Carbon Steel Weldment

by : Mohammed Attallah Mahmoud  -  MSc - 2002
Supervisor(s) : Dr. El-Kousy, M. R. ,Dr. Abdel-Karem, R. M.
( Dissimilar joining, Austenitic stainless steel, Welding )

Roll Bonding of 6061 Aluminum Alloy Plates

by : Ibrahim Elsayed M. Elseaidy  -  MSc - 2002
Supervisor(s) : Dr. Ibrahim, M. M. ,Dr. Ghoneim, M. M.* ,Dr. Morsy, S. M.*
( Solid state welding, 6061 Aluminum alloy, Nuclear fuel, Research reactors, Metal caldding processes )

Zirconia Ceramics for Energy Conversions

by : Omar Abdelal Ahmad Abdelal -  Phd - 2001
Supervisor(s) : Dr. S. M. El-Raghy ,Dr. M. M. E. Ali - National Research Center ,Dr. S. E. El-Hout - National Research Center
( Zirconia ceramic conductivity, ZrO2-CeO2-Gd2O3, SOFC electrolyte )

Zirconia Ceramics for Energy Conversions

by : Omar Abdelal Ahmed Abdelal -  Phd - 2001
Supervisor(s) : Dr S. M. El-Raghy,Dr M. M. E. Ali,Dr S. E. El-Hout
( Zirconia ceramic conductivity, ZrO2–CeO2–Gd2O3, SOFC electrolyte )

Two Phase Relative Permeability: A Review with Some Experimentaland Empirical Determination

by : Salah Khalifa Mohamed Aboreag -  MSc - 2001
Supervisor(s) : Dr E. A. El-Tayeb,Dr Y. A. Michael,Dr K. A. Abdel-Fattah
( Two phase, Relative permeability )

Upgrade of Conventional Reservoir Engineering Methods for Managing Difficult Fields; Application to Zeit Bay Reservoirs.

by : Fawzy Abd El-Fattah Hassan -  MSc - 2001
Supervisor(s) : Dr A. A. Dahab,Dr A. M. A. Assal
( Upgrade, Conventional, Reservoir, Management )

Computational Analysis of Current Density Distribution in Cathodic Protection Using Method Of Images

by : Afifi Abdul Maguied Afifi -  MSc - 2001
Supervisor(s) : Dr M. F. El-Demerdash,Dr H. A. Ahmed,Dr A. A. Adly
( Cathodic protection, Current density distribution, Method of images, Mathematical model )

Role of Indigenous Bacteria in Crude Oil Reservoirs on Relative Permeability Curves

by : Mahmoud Abu El-Ela Mohamed Ali -  MSc - 2001
Supervisor(s) : Dr M. M. Abdel-Dayem,Dr E. A. El-Tayeb
( MEOR, Bacteria, Relative permeability, Displacement )

Effect of Graphite Nodularity on Structure and Properties of Austempered Cast iron

by : Mohamed Ramadan Eid -  MSc - 2001
Supervisor(s) : Dr I. S. El-Mahallawy,Dr A. A. Nofal,Dr R. M. Abdel–Karim
( Cast iron, Austempered ductile iron, Graphite morphology, Heat treatment )

Neural Network Modeling Approach for EOR Method Selection and Predicting PVT Data

by : Hussam Mohamed Abdel Latif -  MSc - 2001
Supervisor(s) : Dr K. A. Abdel-Fattah,Dr M. H. Sayyouh,Dr E. E. Shokir
( Neural network, Back propagation algorithm, Noise test, EOR, Correlation, PVT, Bubble point pressure, FVF )

Effect of Mechanical and Chemical Factors on the Corrosion of Some Copper- Base Alloys

by : Gehan Ismail Youssef -  Phd - 2001
Supervisor(s) : Dr S. M. El-Raghy,Dr F. O. El-Kashif,Dr S. M. Sayed
( Corrosion, Al-brass, Stress corrosion cracking, Fatigue )

Study on Catalytic Reforming Reactions Using Unconventional Catalysts

by : Latifa Khalil Mohamed -  Phd - 2000
Supervisor(s) : Dr M. E. El-Sallaly,Dr S. A. El-Khatib,Dr M. F. Menoufy
( Zeolite Y, Mordenite, Alumina, Catalytic reforming )

Estimation of Hydrocarbon Saturation in Shaly Formations

by : Ahmed Mohamed Ibrahim Dawood -  MSc - 2000
Supervisor(s) : Dr M. M. Abdel-Dayem
( Resistivity, Logging, Empirical, Shaly, Bahariya )

A 3-D Optimization Model for Planning Horizontal Wells

by : Khaled A. Ahmed Mohamed -  MSc - 2000
Supervisor(s) : Dr E. A. El-Tayeb,Dr A. A. Dahab,Dr F. K. Mohamed
( Drilling, Horizontal wells, Optimization model )

Stepped Austempering of GGG40 Ductile Cast Iron

by : Emad El-Din Farouk El-Kashif -  MSc - 2000
Supervisor(s) : Dr A. A. Hussien,Dr S. M. Riad,Dr E. M. El-Banna
( Austempered bainitic transformation, Spheroidal graphite, X-ray diffraction, Ductile iron )

Modelling of Metal/Slag Reactions and Compositions of GMAW of Steels

by : Mona Adel M. A. El-Demellawy -  Phd - 2000
Supervisor(s) : Dr S. M. El-Raghy,Dr A. A. El-Sayed
( GMAW, Metal/slag, FCAW, Steels, Expert system )

Evaluating the Acceptance Criteria of Welding DefectsUsing Three Dimensional Finite Element Analysis

by : Khalid Mahmoud A. Hassan -  Phd - 2000
Supervisor(s) : Dr M. R. El-Kousy,Dr M. M. Farag,Dr I. S. El-Mahallawi
( Welding, Discontinuities, Finite element, Standard specifications )

Aging Behavior of Al-Mg-Si Alloy 6061

by : Mohamed Yasser Said A. Ayad -  MSc - 2000
Supervisor(s) : Dr M. R. El-Kousy,Dr I. S. El-Mahallawi,Dr A. M. El-Shaikh
( Aluminum, Aging, Heat treatment )

Modeling and Comparative Study of Two-Phase Horizontal Flow Correlations

by : Emad El-Din Saad Abd El Fattah -  MSc - 2000
Supervisor(s) : Dr E. A. El-Tayeb,Dr A. A. Dahab,Dr M. K. A. Ahmed
( Modeling, Comparative study, Two-phase, Horizontal flow )

Integration of Core and Petrophysical Data for Reservoir Characterization

by : Khaled Moustafa Hassan Mohamed -  MSc - 2000
Supervisor(s) : Dr M. M. Abdel-Dayem,Dr A. A. Ibrahim
( Core, Petrophysical, Reservoir characterization )

Effect of Salinity on Surfactant Behavior During Micellar / Polymer Flooding Method

by : Mohamed Ahmed Samir Pepars -  MSc - 2000
Supervisor(s) : Dr E. A. El-Tayeb,Dr A. A. Dahab,Dr Y. A. Michael
( Surfactant, Salinity, Precipitation, Cationic exchange )

Simulation of GRP Pipes and Installation Parameters Experimentallyand Using FEA

by : Amr Ali Ibrahim Ali -  Phd - 2000
Supervisor(s) : Dr M. R. El-Kousy,Dr M. M. Farag,Dr I. S. El-Mahallawi
( GRP pipes, FEA, Design cods, Soil stiffness )

Effect of Heat Treatment on Structure and Properties of Duplex Stainless Steel Weldments

by : Walid Mohamed A. Khalifa -  MSc - 2000
Supervisor(s) : Dr S. M. A. Abdel-Gawad,Dr N. M. Abdel-Hamid,Dr M. R. El-Kousy,Dr N. A. Abdel-Reheim
( Duplex Stainless, Weldments, Heat treatment, s-phase, R-phase )

Copper-Tin/Stainless Steel Composites: Characterization and Properties

by : Mostafa Mohamed Ali Abdelmonam  -  MSc - 1999
Supervisor(s) : Dr. A. A. Hussein ,Dr. M. A. Gouda (HTI*) ,Dr. E. M. El-Banna
( Copper, Tin, Composite, Aging, Sintering, Stainless steel )

Interface and Interphase in Cu-Zn/Plain Carbon Steel Composites

by : Dalia El-Sayed Alaa El-Din Mohamed  -  MSc - 1999
Supervisor(s) : Dr. A. M. El-Sheikh ,Dr. M. A. Gouda (HTI*) ,Dr. R. M. A. Abdel-Karim
( Copper matrix, Steel reinforcement, Composites )

Evaluating the Effect of Chromium on Wear Performance of High Manganese Steels

by : Ahmed Mohammed Nageeb Twfiec -  MSc - 1999
Supervisor(s) : Dr. I. S. El-Mahallawy ,Dr. R. M. A. Abdel-Karim
( Wear, High manganese steel, Corrosion )

Abrasion Corrosion of H.S.S.

by : Adel Aly Shawky Aly Missalam -  Phd - 1999
Supervisor(s) : Dr. S. M. El-Raghy ,Dr. M. F. El-Demerdash ,Dr. H. A. Ahmed
( Abrasion, Corrosion, H.S.S. )

Effect of Hydrogen on the Mechanical Properties and Corrosion Behavior of some Austenitic Stainless Steel

by : Ibrahim Taha Hassan Aly -  Phd - 1999
Supervisor(s) : Dr. I. D. Abdel-Razek - Atomic Energy Authority ,Dr. A. A. Abdel-Bar
( Austenitic stainless steel, Hydrogen charging, Mechanical properties, Corrosion )

Alloy Design of Bainitic Ductile Iron Dies(Structure and Properties)

by : Ashraf Aly Abdel-Hady -  Phd - 1999
Supervisor(s) : Dr. A. A. Abdel-Bar ,Dr. N. E. Awad - Helwan Iron Foundries
( Bainitic, Ductile iron, Dies, Austempering )

Mechanical Properties and Weldability of Reinforced Steel Bars Produced from Sponge Iron or Scrap

by : Said Abd El-Azim Attia Abd Alla -  Phd - 1999
Supervisor(s) : Dr. A. M. El-Sheikh ,Dr. M. R. El-Koussy
( Scrap, Sponge iron, Weldability, Reinforced steel )

Development of High Speed Steels for Cast Tooling

by : Sayed Mohamed Ali Ibrahim -  Phd - 1999
Supervisor(s) : Dr. A. A. Hussein
( High speed steels, Cast tool, Milling cutters, Precision casting, Heat treatment, Microstructure, Tool life )

Computational Analysis of Potential and CurrentDensity Distributions in Cathodic Protection Systems

by : Mohamed Alaa El Din Samir  -  Phd - 1999
Supervisor(s) : Dr. S. M. El-Raghy ,Dr. M. F. El-Demerdash ,Dr. H. A. Ahmed
( Cathodic protection, Computational analysis, Corrosion modeling, Potential distribution, Current density distribution. )

Directional Solidification of Ductile Iron under Continuous Casting Conditions

by : Hassan Mahmoud El-Sayed Assr -  MSc - 1999
Supervisor(s) : Dr. A. M. El-Sheikh ,Dr. A. A. Nofal (CMRDI ) ,Dr. N. A. Abdel-Rehim
( Ductile iron, Directional solidification )